NEUTON CE6.3 Battery-Powered Mower -
Safety & Operating Instructions
13
NEUTON CE 6.3 Product Specifications
Motor
RPM 3800
Tip Speed 18,000 ft./min.
AMP Idle 5 – 6
AMP Cutting 10 – 12
MAX Torque (Stall) 2.28 Ft.-Lbs.
Size 750W, 36V DC/50 Amp
Noise Under 80 Decibels
Controls
Start/Stop Safety Control Bar, Start and Stop
Shape Comfortable, Ergonomically Designed Housing
Key Removable Safety Key w/Circuit Breaker
Electric System Printed Wiring Board Control System
User Interface ON/OFF Indication
Mow/OFF/Auxiliary Switch
Battery Voltage Level Indicator
Housing
Material Injected Polypropylene
Assembly Handlebar Assembly only
Handlebar Height Adjustment 34.8" - 40.5" (at lowest Housing height)
36.6" - 42.3" (at highest Housing height)
Wheels, Front 7.25" x 2", Molded Rubber Tread
Wheels, Rear 10" x 2.1", Molded Rubber Tread
Weight 69 lbs. 10 oz. (including Battery)
46 lbs. 5 oz. (without Battery)
Housing Length 34.5"
Housing Width 21"
Housing Height 12.5"
Cutting
Cutting Deck Width 19"
Blade 18.7" Steel Aero Blade (extra Blades available)
Blade Nut Torque 16.6 Ft.-Lbs.
Blade Function Cutting and Mulching
Cutting Height Easily Adjustable from 1.2 – 3.0 inches
Discharge Rear Discharge Chute Included
Bagger Rear Bagger Included
Bagger Capacity 1.33 Bushel (1.65 cubic ft.)
Mulching Mulching Plug Included
Trimming Optional Trimmer/Edger Attachment
Lawn Size Up to 1/3 acre on a single Battery charge
Battery
Voltage 36V DC
AMP 10 Amp-Hour
Type Sealed, Lead/Acid
Weight 23 lbs. 5 oz.
Approximate Run Time 45 - 60 minutes for fully charged Battery
Battery Charger Included with Mower. 36V Charger, plugs into standard electrical outlet
Charge Time 10-12 hours maximum to fully recharge
Replacement Easy to lift out and replace with optional spare Battery
Optional Accessories
Trimmer Plug-in Trimmer/Edger w/2 extra spools
Trimmer Cord 80 MIL/2.0mm Diameter x 14.6 Feet/Spool
Blade Sharpener Hand-Held Sharpener
Protective Cover Fits machine with Handlebars up or down
Striper/Roller Attaches to back of Mower
Meets CPSC Mower Safety Standards
Height Positions
1=1.2" (3.0cm)
2=1.5" (3.8cm)
3=2.0" (5.1cm)
4=3.0" (7.6cm)
To Next Page
Loading...
Need help?
General
