Neuton EM 5.1 User Manual

22 NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions
Adjusting the Cutting Height
Using the cutting height lever (Figure 18), adjust the cutting
height so that you cut off only 1 to 2 inches of grass at a
time.
1. Remove the safety key.
2. Make sure all four wheels are level.
3. Pull the lever (toward the wheel) out of its position
notch. (The cutting height lever is spring-loaded.)
To easily adjust the cutting height, hold the handlebars with
your right hand to keep the Mower steady and adjust the
lever with your left hand.
4. Move the lever to any one of the six cutting height
settings.
Each position adjusts the Mower blade’s level to a different
cutting height. Pulling the cutting height lever up towards position 1 cuts more grass (which leaves
your grass shorter); pushing it down towards position 6 cuts less grass (leaving your grass higher).
The following table lists the final cut grass heights.
Lever Position Cut Height
1 1.2″ (30 mm)
2 1.5″ (38 mm)
3 1.9″ (47 mm)
4 2.2″ (56 mm)
5 2.6″ (65 mm)
6 3.0″ (75 mm)
Figure 18. Cutting height lever set
to leave your grass 1.6 inches high

Neuton EM 5.1 Specifications

General

Brand	Neuton
Model	EM 5.1
Category	Lawn Mower
Language	English