TECHNICAL HANDBOOK LW 50
773179329 01
Hydraulic and pneumatic equipment
Check all lines, hoses and screwed connections
regularly for leaks and obvious damage. Repair
damage immediately. Splashed oil may cause in-
jury and fire.
Depressurize all system sections and pressure
pipes (hydraulic system, compressed-air system)
to be removed in accordance with the specific
instructions for the unit concerned before carrying
out any repair work.
Hydraulic and compressed-air lines must be laid
and fitted properly. Ensure that no connections
are interchanged. The fittings, lengths and quality
of the hoses must comply with the technical re-
quirements.
Noise
During operation, all sound baffles of the machine
must be closed.
Always wear the prescribed ear protectors.
Oil, grease and other chemical sub-
stances
When handling oil, grease and other chemical
substances, observe the product-related safety
regulations.
Be careful when handling hot consumables (risk
of burning or scalding).
Transporting and towing - recom-
missioning
The machine must be towed, loaded and trans-
ported only in accordance with the operating
instructions.
For towing the machine observe the prescribed
transport position, admissible speed and itinerary.
Use only appropriate means of transport and lift-
ing gear of adequate capacity.
The recommissioning procedure must be strictly
in accordance with the operating instructions.
To Next Page
Loading...
Need help?
General
