SPECIFICATIONS
Specifications
DTD-T-U DTD-T-N DTD-I-U DTD-I-N
Electrical Specifications
Sampling frequency and resolution 48/96 KHz, 64 bits internal processing precision
Signal delay Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency
Frequency response 20 Hz to 20 KHz, +/- 0.5 dB (mains out) 20 Hz to 2 KHz +/- 0.5 dB (sub out)
Total harmonic distortion Less than 0.05 % (mains out) Less than 0.02 % (sub out)
Dynamic range 112 dB (A weighted, mains out) 105 dB (A weighted, sub out)
Crosstalk / Channel separation -100 dB (1 KHz)
Indicators Input signal/peak (green/red), amp in signal (green), speaker protect (yellow), power (blue)
Display White backlight graphical OLED display 96 x 16 pixels
Switch and rotary knobs 3 position switch + 2 x rotary knobs
Analog Inputs Characteristics
Number of channels 2 electronically balanced analog inputs
Connectors 2 x XLR-F with link on XLR-M 2 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution 48 to 96 KHz / 24 bits
Max. input level / Input impedance +22 dBU / 20 KOhms
Analog Outputs characteristics
Number of channels 3 electronically balanced analog outputs
Connectors 3 x XLR-M 3 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution 48 to 96 KHz / 24 bits
Max. output level / Output impedance +22 dBU / 200 Ohms
Amplifier Sensing Inputs
Number of channels 4 floating electronically balanced high voltage analog inputs
Connectors 2 x 4 pole SP4 connectors 1 x terminal block (8-pin / 5.08 mm pitch)
Sampling frequency and resolution 48 to 96 KHz / 24 bits
Max. input level / Input impedance +50 dBu (8000 Watts / 8 Ohms) / 364 KOhms
AES input characteristics
Number of channels 1 x AES/EBU stereo digital input
Connectors 1 x XLR-F 1 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution 44.1 to 96 KHz / 16, 20 or 24 bits
Dante
tm
input characteristics
Number of channels 2 x Dante
tm
channels 2 x Dante
tm
channels
Connectors 1 x ruggedized RJ45 1 x RJ45
Sampling frequency and resolution 48-96 KHz / 24 bits 48-96 KHz / 24 bits
USB input characteristics
Type 2 channels of asynchronous USB audio
Connector Female mini USB connector type B
Sampling frequency and resolution 48 KHz / 16 bits
Remote control
Connector Mini USB Mini USB + RJ45 Mini USB Mini USB + RJ45
Physical Specifications
Dimensions (W x H x D) 480 (W) x 44 (H) x 65 (D) mm, 19 inches / 1U
Weight 1.3 Kg
Power supply voltage 90 – 240 V 50/60 Hz
Power consumption 20 W max
Heat dissipation (per hour) 20 Kcal max
Operating Temperature Range 0° C – 40 ° C
Storage temperature range -20 ° C – 60 ° C
Included items Owners’s manual Owners’s manual + terminal plugs
Ordering Information
Ordering Code DTD-TU DTD-TN DTD-IU DTD-IN
PAGE 7 OF 16
To Next Page
Loading...
Need help?
General