3. Speaker Outputs - The A200 features binding posts for a
more convenient speaker connection. Connect the speakers to
the binding posts. Bare wire can be used as well as spade
terminals or banana plugs
4. Power Input - Use the supplied AC/DC adapter to connect
the A200 to a power outlet
CONNECTIVITY OVERVIEW
BT WIRELESS CONNECTION
The NEXT Audiocom A200 features aptX technology. aptX
audio is a technology that ensures you receive high quality audio
from your compatible BT device. To use the A200 as a BT
receiver, it must be paired to your BT audio device.
1. Switch off the A200
2. Set the Audio Source switch to BT
3. Switch on the A200
4. Enter the BT menu on your device
5. Enable BT if not already enabled
6. Search and select “NEXT A200” from the list of available
devices. PIN “2020”
7. The A200 will emit a beep to let you know the pairing was
successful
8. On the “Paired devices” list, search “NEXT A200” and then
select “settings”
9. Select “Use for media audio”
NOTE: The steps 8 and 9, explained above, may vary. Please
refer to your BT source device user manual for instructions.
Make sure you are in a short range when pairing the devices.
Maximum range is about 10 meters but may vary, especially
when there exist obstacles.
CONNECTIVITY/SERVICE
2
NEXT Audiocom | A Series
WARRANTY POLICY
NEXT Audiocom products are warranted, by NEXT Audiocom,
against manufacturing defects in materials or craftsmanship over a
period of 2 years counting from the date of original purchase for
final costumer. The original receipt of purchase is mandatory for
warranty validation purposes, and the product must have been
bought from a NEXT Audiocom authorized dealer. The warranty
can be transferred to a subsequent owner during the warranty
period, however, this cannot extend the warranty period beyond
the original warranty period of two years from the original date of
purchase stated on the NEXT Audiocom’s invoice.
During the warranty period NEXT Audiocom will, at its own
discretion, either repair or replace a product which prove to be
defective provided that the product is returned in its original
packaging, shipping prepaid, to an authorized NEXT Audiocom
service agent or distributor.
NEXT Audiocom cannot be held responsible for defects caused
by unauthorized modifications, improper use, negligence,
exposure to inclement weather conditions, act of God or
accident, or any use of this product that is not in accordance with
the instructions provided by this manual and/or NEXT Audiocom.
NEXT Audiocom is not liable for consequential damages. This
warranty is exclusive, and no other warranty is expressed or
implied.
This warranty does not affect your statutory rights.
CORRECT DISPOSAL
When the A200 is to be definitively discarded, take the product
to a local recycling plant for a disposal which is not harmful to the
environment. This equipment should not be treated as general
household waste.
Devices marked with this symbol must not be disposed of as
household waste. For more information, please contact your
retailer or local authorities.
TECHNICAL SPECIFICATIONS
Product Type: 2 x 160W BT aptX Class D Amplifier
Frequency Response (-6dB): 20Hz - 20kHz
Amplifier Power: 2 x 160W@4Ω / 2 x 100W@8Ω
THD+N: <0.1%
SNR: >90dB
Wireless Connection System: BT v4.1 aptX
Wireless Range: 10m (32.8ft)
Audio Signal Input: BT and 2 x RCA (Stereo)
Power Supply: ~110-240V In / 36V DC, 4.5A Out
Cabinet Material: Aluminum
Dimensions (WxHxD): 117 x 39 x 211mm (4.6 x 1.5 x 8.3”)
Net Weight: 0.65kg (1.43lb)
Shipping Weight: 1.4kg (3.1lb)
To Next Page
Loading...
General