Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
2
Setup
Programming Instructions
1 32 4
1
3
2
4a 4b
Locks are shipped with factory default settings (only operates by pressing = `). Setup must be completed to register the Programming
Key and Manager Keys to all the locks.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn on.
Insert one Manager Key at a time.
A two-tone beep will be heard for
each Manager Key registered.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn o.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to setup
all locks.
Express Register Manager Keys
The Programming Key can quickly register the same Manager Keys to operate multiple locks.
Go to the lock already registered to operate with the Manager Keys.
Press
=` 66 `
.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn o.
At each lock to be registered, insert the Programming Key.
A two-tone beep will be heard and the LED will ash once to indicate
successful registration.
End express registration mode.
Go to any registered lock.
Press
= ` then insert the Programming Key.
Press
= ` then insert the Programming Key again to return the bolt to the
original position.
To Next Page
Loading...
Need help?
General
