Compressor heater
AMS 10 is equipped with a compressor heater (CH) that
heats the compressor before start-up and when the
compressor is cold. (Does not apply to AMS 10-6.)
NOTE
The compressor heater must have been connec-
ted for 6 – 8 hours before the first start, see the
section “Start-up and inspection” in the In-
staller Manual for the indoor module or control
module.
NOTE
For information: See chapter “Commissioning
and adjustment” in the Installer Manual for
HBS 05.
AMS 10Chapter 6 | Commissioning and adjusting30
6 Commissioning and adjusting
To Next Page
Loading...
Need help?
General
