Name: Nice MIGHTY MULE MMT103
Brand: Nice
Rating: 4 (1 reviews)

To Next Page

RED LED

LEARN

BUTTON

Lights Flash

RED LED

Flash

DESCRIPTION:

The MMT103 Code Safe entry remote is a wireless radio control designed for use with Mighty Mule

garage door openers and can also be programmed to your Mighty Mule gate openers. One remote for

two or three devices.

Each of the remote’s three buttons will send a unique code when pressed. All buttons can be used to

activate an individual Mighty Mule garage door opener, multiple Mighty Mule garage door openers or

Mighty Mule garage door opener(s) and gate opener(s).

MMT103

3-BUTTON ENTRY REMOTE

Instructions

PROGRAMMING

Press the operator’s LEARN button (S3) until

the operator’s red LED ashes once and the

light turns on. A remote must be added while

the light is still on (15 seconds).

Send a signal from the desired button on the

remote. The operator’s light and the red LED

will ash once if the remote was added.

Repeat to program additional buttons for other

garage door openers.

After programming, test the remote from various

locations. Be sure the door or gate areas are clear.

Activate the remote and verify that the receiver

triggers the opener(s).

PRINTER’S INSTRUCTIONS:

INSTR, INSTL, MMT103 - P/N: 10015841 Rev-E X1 - INK: BLACK - MATERIAL: 20# MEAD BOND - SIZE: 8.500” x 11.00” - SCALE: 1-1

PROGRAMMING THE REMOTE TO THE GARAGE DOOR OPENER

DELETING A REMOTE FROM THE GARAGE DOOR OPENER OR GATE OPENER

PROGRAMMING THE REMOTE TO MIGHTY MULE 7TH GENERATION AUTOMATIC GATE OPENER

If you have a Mighty Mule gate opener, you can program one of the

buttons to open the gate also.

Press and hold button 1 and button 3 at the same time for 5

seconds. The LED will turn on, then release the buttons.

Press and release the button that you want to learn the gate

opener code to.

Hold the gate opener remote with the front/top facing the side of

the MMT103. Press the button on the gate opener remote and

the LED on the MMT103 will blink twice when it has successfully

learned the code.

The button you programmed will now transmit the gate opener code as

indicated by the LED being solid on when the button is pressed.

PROGRAMMING/LEARNING A GATE OPENER REMOTE

Button #1

LED

Button #3

Press and release the button you

want to learn the gate operator code

Press and hold the gate operator transmitter button

until the LED on the MMT103 blinks twice

LED

DELETING A DIP SWITCH CODE

Press and hold button 1 and button 3 at the same time for

about 5 seconds. The LED will turn on, then release the

buttons.

Press and hold the button you want to delete a code from for

5 seconds, then the LED will blink twice indicating the DIP

switch code was successfully removed.

Press and hold the button you want

to delete a code from for ve seconds.

Button #1

LED

Button #3

10015841 Rev-D

When the red light on the remote glows dimly, or fails to light at all

when the remote is activated, the batteries need replacing.

Twist a coin, visor clip or screw drive in slot to open case.

Lift off top of case.

Carefully remove the circuit board.

Remove old battery and properly dispose them.

Replace battery with new Type 2032 battery – PLUS SIDE UP.

Re-assemble the remote.

REPLACING REMOTE’S BATTERY

If a remote is already programmed to the opener and you want to delete it, follow the same procedure as PROGRAMMING THE REMOTE

above. The opener will recognize the remote and delete it from memory.

4 5

1 2 3

WARNING

KEEP BATTERIES OUT REACH OF CHILDREN. Swallowing batteries can lead to serious injury or death. If you suspect

someone has swallowed a battery, go to the hospital immediately. Do not induce vomiting or eat or drink anything.

For more information, call the National Battery Ingestion Hotline: 202-625-3333.

The battery identication number for this product is CR2032.

WARNING: Changes, modications or adjustments not expressly approved by Nice North America LLC could void the user’s authority to operate this equipment. There Are No User

Serviceable Parts.

NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada License-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference, including interference that may cause undesired operation of the device.

MIGHTY MULE LIMITED WARRANTY

This product is warranted to the original consumer (“You”) by Nice North America against defects in material and workmanship for a period of twelve (12) months from the date of purchase.

This limited warranty only extends to you if the item was purchased directly from Nice North America or through an authorized sales partner. Nice North America will, at its option, either repair

or replace any product that it conrms is defective and eligible for service under this warranty and will return the repaired or replaced product to you at Nice North America’s cost. This warranty

does not apply to damage to the product from negligence, abuse, abnormal usage, misuse, accidents, acts of god, normal wear and tear, failure to follow the manufacturer’s instructions, or

arising from improper installation, storage or maintenance. Some states do not allow the exclusion or limitation of incidental and consequential damages, so the above limitation or exclusion

may not apply. This warranty gives you specic legal rights and you may also have other rights, which vary from state to state. In order to be protected by this warranty, a copy of the receipt or

other valid proof of purchase must be provided with any product that is being repaired or replaced under this warranty. In order to initiate warranty service for your product, please contact Tech

Services at (800) 421-1587 for a Return Authorization Number (“RA”) and other important details. This warranty gives you specic legal rights and you may also have other rights, which vary

from state to state. In order to be protected by this warranty, a copy of the receipt or other valid proof of purchase must be provided with any product that is being repaired or replaced under this

warranty. In order to initiate warranty service for your product, please contact Tech Services at (800) 421-1587 for a Return Authorization Number (“RA”) and other important details.

LED1

LED2

LED3

Press the gate opener’s LEARN button (S3) located

on the control board.

Press the desired button on the remote to

complete programming process. The remote is now

programmed to the gate opener.

Mighty Mule Sales: 800-543-4283

Mighty Mule Technical Service 800-421-1587

For more information about the full line of Mighty Mule Automatic Gate Operators,

Gate Openers and Access Controls visit