Lens Care
~
.
Clean lens surface with a blower brush. To remove dirt and smudges,
use a soft, clean cotton cloth or lens tissue moistened with ethanol
(alcohol) or lens cleaner. Wipe in a circular motion from center to outer
edge, taking care not to leave traces and not to touch the other lens
parts.
If you use ether in cleaning the lens, a smudge sometimes appears on
the surface of a multi-coated lens. If this happens, wipe it again with a
cotton cloth moistened with alcohol.
.
Never use thinner or benzine to clean the lens.
.To protect the lens surface from dirt or damage, the use of an NC filter is
recommended at all times. The lens hood also helps to protect the lens,
. Keep the lens cap in place whenever the lens is not in use.
. If you will not use the lens for a long time. protect it from rust and mold
by storing it in a cool, dry place. Also, do not store in direct sunlight, and
keep it away from naphthalene or camphor.
. Be careful not to get the lens wet or drop it in water. Water on the lens
may cause malfunction.
. Reinforced plastic is used on the exterior of the lens unit; to avoid
damage. take extra care to never leave the lens in an excessively hot
place.
Optional Accessories
62mm screw-in filters, Screw-in lens hood HN-22. UR-3 adapter
(for 58-21), Hard lens case CL-32s. Flexible lens pouch No. 62,
AI Teleconverter TC-201, AI Teleconverter TC-14A
Specifications
Focal length: 60mm
Maximum aperture: 1/2.8
Lens construction: 8 elements in 7 groups
Picture angle: 39.40'
Distance scale: Graduated in meters and feeVinches from 0.219m
(83/4 in.) to infinity
(00)
Distance information: Output into camera body
Reproduction ratio: 1: 1 0 to 1 : 1 (life size)
Aperture scale: f/2.8 to f/32 on both standard and aperture-direct-readout
scales
Minimum aperture lock: Provided
Diaphragm: Fully automatic
Exposure measurement: Via full-aperture method for AI cameras or
cameras with CPU interface system: via stop-down method for
other cameras
Mount: Nikon bayonet mount
Attachment size: 62mm (p=0.75mm)
Dimensions: Approx. 70mm dia. x 74.5mm extension from the camera's
lens mounting flange; overall length is approx. 82.8mm
Weight: Approx. 455g
11
To Next Page
Loading...
Need help?
General
