AF-Area
Mode
AF-area
mode
determines
how
the
focus
point
is
selected in autofocus
mode
(0
74).
To
select the AF-area
mode, rotate the AF-area
mode
selector. The
following
options are
available:
Nlkon
AF-area
mode
selector
Description
User selects focus
point
manually; camera focuses on
subject in selected focus
point
only.
Use
for relatively static
compositions
with
subjects
that
will stay in selected focus
point.
•
In
continuous-servo
AF
(m
74),
user selects focus
point
manually;
if
subject briefly leaves selected focus point,
camera will focus based on information from surrounding
points. Number
of
focus points used can be selected from
9,21,
and
51
using Custom Setting
a3
(Dynamic
AF
area,
0264).
If
51
points (3D-tracking)
is
selected for Custom
Setting
a3,
focus
point
will be selected automatically
using 3D-tracking.
•
In
single-servo
AF,
user selects focus
point
manually; camera
focuses on subject in selected focus
point
only.
Camera automatically detects
subject and selects focus point.
If
type
G
or
D lens
is
used, camera can
distinguish human subjects from
background for improved subject
detection. In single-servo
AF,
active
focus points are
highlighted
for
about
one second after camera focuses. Active focus points
are
not
displayed in continuous-servo
AF.
Mode
[[]]
Single-
point
AF
[.]
Auto-area
AF
E(]~
Dynamic-
area
AF
76
To Next Page
Loading...
Need help?
General
Weight and Dimensions
