Nikon D300S - Page 67

4 Choose single-servo
autofocus.
Focus-mode
selector
Rotate the focus-mode selector
until it clicks into place
pointing to S(single-servo
autofocus). At this setting,
the
camera will automatically focus
on the subject in the selected
focus
point when the shutter-
release
button is pressed
halfway. Pictures can
only be taken when the camera is in
focus.
5 Choose matrix metering.
Rotate the metering selector to
(e:::: (matrix metering). Matrix
metering uses information
from the 1,OOS-pixel RGB
sensor to ensure optimal
results for the entire frame.
6 Check camera settings.
Metering selector
Exposure mode HIe] :2 5 FS.6
L IDcF
-, LJSD
NOR! C. J:
A
@BI(
AF-area mode
, r')K
I.U
Ic5 F5.6 p ISQ ~DD[
Control panel
Viewfinder display
41