113
Technical Notes—Optional Accessories
Other Accessories
At the time of writing, the following accessories were available for the D50.
Contact your retailer or local Nikon representative for details.
Batteries/
Chargers/
AC adapters
♦ EN-EL3 Rechargeable Li-ion Battery: Additional EN-EL3 batteries are
available from local retailers and Nikon service representatives.
♦ EH-5 AC Adapter: Use the EH-5 to power the camera for extended
periods.
♦ MH-19 Multi Charger: The MH-19 can be used to recharge the fol-
lowing batteries: EN-EL3 rechargeable Li-ion batteries, MN-30 bat-
teries for the F5 camera (with MC-E1), MN-15 batteries for the F100
camera (with MC-E2), EN-4 batteries (for D1 series cameras), or EN-3
batteries for the E3 camera. The charger can charge two pairs of
batteries of different types, for a total of four batteries, and comes
with a twelve-volt cable for connection to a cigarette-lighter socket.
Viewfi nder
eyepiece
accessories
♦ Diopter-Adjustment Viewfi nder Lenses: Lenses are available with
diopters of –5, –4, –3, –2, 0, +0.5, +1, +2, and +3 m
–1
. Use diopter
adjustment lenses only if the desired focus can not be achieved with
the built-in diopter adjustment control (–1.6 to +0.5 m
–1
). Test diopter
adjustment lenses before purchase to ensure that the desired focus
can be achieved.
♦ DG-2 Magnifi er: Magnify the scene displayed in the center of the
viewfi nder for close-up photography, copying, telephoto lenses, and
other tasks that call for added precision. Eyepiece adapter required
(available separately).
♦ Eyepiece Adapter: Use to attach the DG-2 Magnifi er to the D50.
♦ DR-6 Right-Angle Viewing Attachment: The DR-6 attaches at a right
angle to the viewfi nder eyepiece, allowing the image in the view-
fi nder to be viewed from above when the camera is in the horizontal
shooting position.
Body caps
♦ BF-1A Body Cap: The BF-1A keeps the mirror, viewfi nder screen, and
low-pass fi lter free of dust when a lens is not in place.
Remote
controls
♦ ML-L3 Wireless Remote Control: Use the ML-L3 as a remote shutter
release for self-portraits or to prevent blur caused by camera shake.
The ML-L3 uses a 3 V CR2025 battery.
햲햳 햴 햵햶
To Next Page
Loading...
Need help?
General
Weight and Dimensions
