63
Reference—Printing Photographs
Connecting the Printer
1
Set the USB option in the setup menu to PTP
( 71).
2
Turn the printer on.
3
Turn the camera off and connect the supplied
USB cable as shown. Do not use force or at-
tempt to insert the connectors at an angle.
Connect the camera directly to the printer;
do not connect the cable via a USB hub.
4
Turn the camera on. A welcome screen will
be displayed, followed by the PictBridge
playback display. Proceed to “Printing Pho-
tographs One at a Time” ( 64) or “Printing
Multiple Photographs” ( 65).
Press the multi selector left or right to view additional photographs,
or press and hold the button to zoom in on the current photo (
66). To view six photographs at a time, press the button. Use the
multi selector to highlight photographs, or press the button again
to display the highlighted photograph full frame.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
