• ••••••••••••••••••••••
--
---
-
--~
--------------------------
With G-type Nikkor lens
Position lens
in
the camera's bayonet mount so that the
mounting indexes on lens and camera body are aligned,
then twist lens counterclockwise until it locks into place.
(Be sure not to touch the lens release button.)
z
Q
3
~
Detaching the lens.
if
w
• Push and hold the lens release button, then turn the
IE
lens clockwise to detach the lens.
When
camera
is
left
unattended
without
lens
When you leave the camera unattended without a
lens attached, be sure to attach the supplied
body cap (page
3)
,
or
optional body cap BF-1A.
(BF-1 body cap cannot be used.)
NOTE:
Non-CPU
Nikkor
lens
When a non-CPU Nikkor lens is attached and the power switch is turned on,
F-
- blinks in the LCD panel and viewfinder, and the shutter cannot be released
(except
in
Manual exposure mode). See page 90 for a non-CPU lens.
Check
points
• Use a D- or G-type AF Nikkor lens to utilize
all
of
this camera's functions. (See
page 88 for Lens Compatibility.)
• Make sure
to
turn the power· switch off when attaching/detaching the lens.
• Avoid direct sunlight when attaching/detaching the lens.
19
To Next Page
Loading...
Need help?
General
