12
Be sure to always follow these guidelines.
WARNING
Use the stereoscopic microscope for microscopic
observation only. Do not use it for any other applications.
1. Installation location
Note the following points when installing the stereoscopic
microscope.
• Install the microscope in a location with the temperature between
0°C and 40°C, and humidity of less than 80%. If installed in a hot
and humid location, mold could form on the lenses or
condensation could form inside, resulting in a deterioration of
performance or damage to the microscope.
• Install the microscope in a location that is not subject to vibration.
• Install the microscope in a level location.
• Install the microscope in a location that is free of dust and dirt.
2. Handle the microscope gently
The stereoscopic microscope is a precision optical instrument.
Handle it carefully, and do not subject it to impacts.
3. Do not disassemble
Disassembly may cause damage to the instrument. Never
disassemble any part except as described in this manual. If you
notice any malfunction in this instrument, notify your nearest Nikon
representative.
4. Lens cleaning
Do not get dust, fingerprints, etc., on the lenses. Dirt on the lenses
will adversely affect the view of the image. If any of the lenses get
dirty, clean them as described below.
To Next Page
Loading...
Need help?
General
