EasyManuals Logo
Home>Nilfisk-Advance>Pressure Washer>C 125.4

Nilfisk-Advance C 125.4 User Manual

Nilfisk-Advance C 125.4
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
T
R
C
S
H
P
L
HR
SL
SK
L
V
LT
ET
R
Z
H
IMPORTANT!
The bearing capacity of the wall hook is max. 30 kg.
4.7 Pairing the machine (Models with wireless regulation)
B18 Before using the machine with wireless regulation, the spray handle must be electrically
paired to the machine. When the battery has been mounted - ref. section 3.4, and the
spray handle is in pairing mode (orange LED is fl ashing (1) then turn on (2) the machine.
The orange LED is now turned off and the spray handle is operational.
4.8 Using wireless regulation (Models with wireless regulation)
B19 The water pressure and use of energy is regulated by clicking the arrows (1) on the spray
handle. The power can be regulated stepwise by pushing and releasing each button. It
can also be regulated continuously by pushing and holding down each button. If so, the
power will be increased/ decreased until max/ min is reached. The green LED illustrating
the power level (2) is only lighting when pressing the up/down keys (1).
Other wireless units (eg. microwave ovens, baby monitors, neighbours' wireless
devices) that operate in the 2.4 GHz band can have a reduced effect on the wireless
range between spray handle and machine.
5 Fields of application and working methods
5.1 General
Effi cient high presure cleaning is achieved by following a few guidelines, combined with your
own personal experience of specifi c cleaning tasks. Accessories and detergents, when correct-
ly chosen, can increase the effi ciency of your pressure washer. Here is some basic information
about cleaning.
5.1.1 Detergent and foam
Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct
contact with the dirt. Detergents are applied from bottom to top, for example on a car body-
work, in order to avoid "super clean" areas, where the detergent collects in higher concentrati-
on and streams downwards. Let the detergent work for several minutes before rinsing but never
let it dry on the surface being cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surface that has to be cleaned can be da maged.
5.1.2 Mechanical effect
In order to break down tough layers of dirt, additional mechanical effect may be required. Spe-
cial wash brushes offer this supplementary effect that cuts through dirt (especially by car wash-
ing).

Other manuals for Nilfisk-Advance C 125.4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance C 125.4 and is the answer not in the manual?

Nilfisk-Advance C 125.4 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelC 125.4
CategoryPressure Washer
LanguageEnglish

Related product manuals