8
www.ninjakitchen.com
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assembly with care,
as the blades are very sharp.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher in the dishwasher. Place the lid and
blade assembly on the top rack. Use caution when
handling the blade assembly as the blades are very sharp.
OR
4 Carefully hand wash the lid, pitcher and blade assembly
in warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1 Store the Ninja
®
Pulse Blender upright with the pitcher,
blade assembly and cover on the motor base. Do not
place anything on top.
RESETTING THE MOTOR THERMOSTAT
The Ninja Pulse Blender features a unique safety system
which prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blades.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General
