Ninja BL450 series Instructions

ninjakitchen.co.uk 7ninjakitchen.co.uk6 7ninjakitchen.co.uk
GETTING TO KNOW YOUR NUTRI NINJA® PRO
A
C
B
D E F
MAIN UNIT
A Pro Extactor Blades® Assembly
B Spout Lid (x2)
C 500ml. Nutri Ninja® Cup
D 600ml. Nutri Ninja® Cup
E 900ml Nutri Ninja® Cup
F Motor Base (power cord not shown)
BEFORE FIRST USE
1 Remove all packaging material and labels from the appliance. Separate all parts from
each other.
2
Wash the lids, Nutri Ninja Cups and Pro Extractor Blades® Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly , use a dishwashing utensil with a
handle to avoid direct hand contact with blades.
3 Handle blade assemblies with care to avoid contact with sharp edges. Rinse and
air-dry thoroughly.
4 The lids, Nutri Ninja Cups, and Pro Extractor Blades Assembly are all dishwasher safe.
It is recommended that the lids and Pro Extractor Blades Assembly be placed on the
top rack. Ensure that the Pro Extractor Blades Assembly is removed from the cup
before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
ASSEMBLY
1 Place the motor base on a clean, dry,
level surface such as a worktop or table
top. Add ingredients to the Nutri Ninja®
Cup. Place the Pro Extractor Blades
Assembly onto the cup and twist it on
tightly until you have a good seal.
NOTE: Do not overfill! To avoid spilling,
do not add ingredients past the “MAX”
fill line.
2 Turn the cup upside down and place it
onto the motor base, aligning the tabs
on the cup with the motor base. Turn it
clockwise, the unit is ready for use.
PULSE
3 Press down on the top of the cup
in short intervals to activate.
USE
TIPS:
• For best results, use short “PULSES”.
IMPORTANT: Review all warnings
on pages 4–5 before proceeding.
REMOVAL
4 When ingredients have reached the
desired consistency, stop the appliance
by removing your hand from the cup.
Wait for the motor to stop running.
Then turn the cup anti-clockwise and
pull straight up to remove.
5 Turn the cup upright and remove
the Pro Extractor Blades Assembly
by twisting the Pro Extractor Blades
Assembly anti-clockwise.
6 Do not store blended contents with the
Pro Extractor Blade Assembly attached.
7 Place the spout lid onto the cup, twist
to seal and enjoy!
8 For storage, only use spout lid to cover.
9 Be sure to store the Pro Extractor
Blades Assembly attached to an
empty cup when not in use.
10 Make sure that the motor base is
unplugged when not in use.

Ninja BL450 series Specifications

General

Brand	Ninja
Model	BL450 series
Category	Blender
Language	English