ninjakitchen.co.uk8 9ninjakitchen.co.uk 9ninjakitchen.co.uk
PURPOSE SUGGESTED CUP TYPE OF FOOD
Chopping/Pulsing
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Salsa
Leafy Herbs
Nuts
Chocolate
Grating
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Cheese
Breadcrumbs
Mixing
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Batters
Dips
Sauces*
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Vinaigrettes
Salad Dressings
Simple Sauces*
Frozen Blending
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
500ml Nutri Ninja® Cup
650ml Nutri Ninja® Cup
900ml Nutri Ninja® Cup
Fruits
Vegetables
Leafy Greens
CAUTION: DO NOT process dry ingredients without adding liquid to the cup.
This product is not intended for dry blending.
* When blending sauces, make sure they’re cooled to room temperature first.
Ninja® containers are not intended for hot blending.
FILLING YOUR NUTRI NINJA® CUP
For best results, always follow recipe
directions when filling your Nutri Ninja
cups. When you’re not using a recipe,
use the following guidelines:
Start with your fresh fruit or veggies.
Then add any nuts, seeds or powder
followed by any liquids like juice or milk.
More liquid can help to integrate powder.
Then add your frozen fruit and ice.
Remember to securely tighten the blade
and don’t overfill the cups.
fresh fruits/
vegetables
nuts, seeds,
powders
frozen fruit
ice
juices, liquids
SUGGESTED USES CARE & MAINTENANCE
STORING
Store the Nutri Ninja Pro upright with the
blade assembly attached to the Nutri
Ninja Cup. Do not place anything on top.
Store the rest of the attachments in a safe
place where they will not be damaged
and won’t cause harm. Loosely wrap the
power cord around the cord wrap.
NOTE: Do not store blended or
unblended ingredients in the Nutri Ninja
Cup with the blade assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja Pro features a safety
system which prevents damage to the
unit’s motor and drive system should you
inadvertently overload your appliance.
If the appliance is being overloaded, the
motor will stop. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the
electrical socket.
2 Remove and empty the cup and
ensure that no food is jamming the
Pro Extractor Blades Assembly.
3 Allow the appliance to cool for
approximately 30 minutes.
4 Re-install the cup onto the base
and re-plug the appliance into the
electrical socket.
5 Proceed to use the appliance as before
while making sure not to exceed the
recommended maximum capacities.
CLEANING
1 Separate all parts from each other.
2 Hand-Washing
Wash the lids, Nutri Ninja® Cups and
Pro Extractor Blades® Assembly in
warm, soapy water. When washing the
Pro Extractor Blades Assembly, use a
dish-washing utensil with a handle to
avoid direct hand contact with blades.
Handle Pro Extractor Blades Assembly
with care to avoid contact with sharp
edges. Rinse and air-dry thoroughly.
Dishwasher
Containers, lids, and Pro Extractor
Blades Assembly are all top-rack
dishwasher safe. Ensure the Pro
Extractor Blades Assembly is removed
from the cup before placing in the
dishwasher.
3 Wipe the motor base clean with a
damp cloth
To Next Page
Loading...
Need help?
General
