Ninja BL685 User Manual

Care & Maintenance
HOW TO CLEAN
A CAUTION : Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning .
A CAUTION : DO NOT immerse the motor base into
water or any other liquid.
1 Separate / remove all parts from each other.
2 Hand Washing : Wash the containers. lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly .
Dishwasher : The containers , lids , blade assemblies
and attachments are all dishwasher safe . The lids and
blade assemblies are top rack dishwasher safe . Ensure
the blade assembly is removed from the container
before placing in the dishwasher.
A WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades' edges can result in
laceration.
3 Wipe the motor base clean with a damp cloth .
NUTRI NINJA® PRO EXTRACTOR BLADES®
ASSEMBLY
When washing the Pro Extractor Blades Assembly, do
not attempt to remove the seal. Removing the seal can
cause damage to the seal which can result in improper
reassembly and leaking.
If the blade seal becomes loose or if any servicing
needs to be performed on the appliance, please call
customer service at 1-877-646-5288.
11 I B? 1-877-646-5288
BL685_Series_lB_ 170428_press.indd 12
HOW TO STORE
1 Store the Ninja ® Professional Kitchen System upright
with the blade assembly inside the corresponding
container with the lid secured on top. Do not place
anything on top . Store the rest of the attachments in a
safe place where they will not be damaged and won 't
cause harm. Loosely wrap the power cord around the
cord wrap on the back of the motor base .
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Kitchen System features a unique
safety system which prevents damage to the unit 's motor
and drive system should you inadvertently overload your
appliance . If the appliance is being overloaded, the
motor will stop . Allow the appliance to cool for
approximately 15 minutes. To reset the appliance ,
follow the resetting procedure below :
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assembly .
3
Allow the appliance to cool for approximately 15
minutes .
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
2017-05-01 9:08 AM I
Case 2:23-cv-02144 Document 1-1 Filed 03/20/23 Page 12 of 16 PageID #: 23

Ninja BL685 Specifications

General

Brand	Ninja
Model	BL685
Category	Blender
Language	English