Ninja BL710WM User Manual

9 10ninjakitch en.com
ninjakitch en.com
MEDIUM
LOW
HIGH
PULSE
9 Holding the lid by the handle in the
upright position, place it on top of the
pitcher, aligning the arrow (
) located on
the lid with the arrow (
) located on the
pitcher’s handle. Press the handle down
until you hear a click.
10 Select the speed according to your
blending requirements*:
• Use the LOW setting for processing
and mixing.
• Use the MEDIUM setting for blending
and ice crushing.
• Use the HIGH setting for pureeing and
liquefying.
• Use the PULSE button for controlled
chopping and processing.
*See Blending Chart.
NOTE: Pulse ingredients for even
chopping by pressing down in short
intervals.
MEDIUM
LOW
HIGH
PULSE
MEDIUM
LOW
HIGH
PULSE
ASSEMBLY & USE OF THE PITCHER – CONT.
11 When ingredients have reached your
desired consistency, stop the appliance
by pressing the power button ( ) and
wait for the Stacked Blade Assembly to
stop turning.
12 To remove the lid, press the release
button on the lid, pull the lid handle up
to a 90° angle, and lift the lid o. Turn
the pitcher counterclockwise and then
lift o the base.
13 Open the pour spout cap and use the
spout to empty liquid contents.
For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid o the pitcher.
Then, carefully remove the Stacked Blade
Assembly by the top of the shaft. Place
Stacked Blade Assembly away from the
work area to avoid accidental contact.
Finally, empty contents from the pitcher.
14 Make sure the unit is unplugged when
not in use.
CLEANING
1 Separate all parts from each other.
2 Hand-Washing: Wash the pitcher, lid,
and Stacked Blade Assembly in warm,
soapy water. When washing the Stacked
Blade Assembly, use a dishwashing
utensil with a handle to avoid direct
hand contact with blades. Handle blade
assembly with care to avoid contact
with sharp edges. Rinse and air-dry
thoroughly.
Dishwasher: The pitcher, lid, and
Stacked Blade Assembly are all
dishwasher safe. The lid and Stacked
Blade Assembly are top-rack dishwasher
safe. Ensure the Stacked Blade
Assembly is removed from the pitcher
before placing in the dishwasher.
3 Wipe the motor base clean with a damp
cloth
.
STORING
1 Store the Ninja ® Professional 1000 upright
with the Stacked Blade Assembly inside
the pitcher with the lid secured on top.
Do not place anything on top. Loosely
w rap the power cord around the cord
storage hook in the back of the unit.
RESETTING THE MOTOR
THERMOSTAT
The Ninja ® Professional 1000 features a
unique safety system that prevents damage
to the unit’s motor and drive system should
you inadvertently overload the unit. If the
unit is overloaded, the motor will stop. To
reset the unit, follow the resetting procedure
below:
1 Unplug the unit from the electrical
outlet.
2 Remove and empty the pitcher and
ensure no ingredients are jamming the
Stacked Blade Assembly.
3 Allow the unit to cool for approximately
15 minutes.
4 Place the pitcher onto the base and plug
the unit into the electrical outlet.
5 Proceed to use the unit as before,
making sure to not exceed the
recommended maximum capacities.
CARE & MAINTENANCE

Ninja BL710WM Specifications

General

Brand	Ninja
Model	BL710WM
Category	Blender
Language	English