Ninja Express Chop NJ100 Series User Manual

7
1-877-646-5288
Using the Ninja
®
Express Chop
®
WARNING: DO NOT try to place the blades onto
the power head and then into the Ninja
®
Express
Chop
®
.
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by
the shaft.
CAUTION: DO NOT add more than 2 cups dry or 1
cup liquid ingredients as this may cause
overflow.
CAUTION: DO NOT operate without the splash
guard in place.
IMPORTANT: Never run the appliance empty.
1 Place the processor bowl on a clean, dry, level surface.
2 Holding the chopping blade by the shaft, carefully place it
over the spindle pin inside the processing bowl. (Fig. 1)
IMPORTANT: Always assemble the blades inside
the container.
3 Carefully spin the blade counter clockwise to make sure
that it has inserted properly. (Fig. 2)
4 Place the food ingredients into the bowl.
IMPORTANT: Never add ingredients into the
processing bowl before placing the blade
assembly in first.
5 Place the splash guard / storage lid on the bowl. (Fig. 3)
6 Open the flap on the splash guard. (Fig. 3)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap

Ninja Express Chop NJ100 Series Specifications

General

Brand	Ninja
Model	Express Chop NJ100 Series
Category	Food Processor
Language	English