7
1-877-646-5288
WARNING: DO NOT try to place the blade onto the power
head and then into the Master Prep
®
Professional Pitcher.
3 Add the ingredients to be processed into the Master Prep
®
Professional pitcher.
IMPORTANT: Never add ingredients into the Master Prep
®
Professional pitcher before placing the blades in first.
4 Place the pitcher splash guard onto the top of the Master
Prep
®
Professional pitcher. (Fig. 3)
Using the Master Prep
®
Professional Pitcher
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance empty.
1 Place the Master Prep
®
Professional Pitcher on a clean, dry,
level surface.
2 Holding the blade by the shaft, place it onto the spindle pin
inside the Master Prep
®
Professional Pitcher.
• Use the Ninja
®
6-Blade in the 1.5 LPitcher. (Fig. 1)
• Use the Ninja
®
4-Blade in the 1.25 L Pitcher. (Fig. 2)
IMPORTANT: Place blade inside the container carefully as
blades are sharp.
Shaft
Shaft
Fig. 1
Fig. 3
Fig. 2
To Next Page
Loading...
Need help?
General