9
1-877-646-5288
Blending Chart
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor doesn't start, or
Stacked Blade Assembly
doesn't rotate.
Make sure the pitcher is securely locked in place on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned off. Press the power button ( ) to turn on.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated or overloaded. Unplug and wait approximately 15
minutes before using again.
Food is unevenly chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size. Try processing smaller amounts per batch.
Food is chopped too fine or is
too watery.
The food has been over-processed. Use PULSE button for controlled processing.
Food collects on lid or on the
sides of the pitcher.
The mixture is to thick. Add more liquid.
You can't crush ice into snow.
DO NOT use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Troubleshooting Guide
BUTTON FUNCTION USE
POWER
On/Off Always turn off appliance when not in use.
1
Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, puree
cooked foods and uncooked fruits, and chop vegetables for dips and salsa.
2
Blending &
Ice Crushing
Grate hard cheeses, grind nuts, blend dips, soups*, sauces*, and spreads,
and chop ingredients thoroughly. Blend mixed drinks, powdered drinks, or
milk shakes. Crush ice cubes for snow cones, chilled beverages, or frozen
slushes.
3
Pureeing &
Liquefying
Mix smoothies and frappes, liquefy thick mixtures, and blend whole fruits
and vegetables.
PULSE
Controlled
Processing
& Bursts of
Power
Use to control chopping and processing.
* When blending soups or sauces, make sure they’re cooled to room temperature first. Ninja
®
containers
are not intended for hot blending.
To Next Page
Loading...
Need help?
General