EasyManuals Logo
Home>Ninja>Blender>NJ600WM Series

Ninja NJ600WM Series User Manual

Ninja NJ600WM Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2
ninjakitchen.com
20 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner, or in a heated oven).
21 The use of attachments or accessories
(including canning jars) not recommended by
the manufacturer may result in fire, electric
shock, or personal injury.
22 DO NOT remove the pitcher from the motor
base while the appliance is in operation.
23 To reduce the risk of injury, NEVER operate
the appliance without the lid in place. DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
24 DO NOT expose the pitcher to extreme
temperature changes.
25 DO NOT overfill. NEVER exceed the Max Fill
line.
26 DO NOT operate the appliance empty.
27 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
28 If the unit overheats, a thermal switch will
become activated and shut off the motor. To
reset the appliance, unplug it and let it cool
down for approximately 15 minutes before
using again.
29 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. DO NOT use
this appliance for anything other than its
intended use. DO NOT use outdoors.
30 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
8 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
9 Appliance accessories are not intended to be
used in the microwave. Doing so may result
in damage to the accessories.
10 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet. Instead
grasp the plug and pull to disconnect.
11 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, or has been dropped or
damaged in any manner. This appliance has
no serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
12 This appliance has important information
on the plug prong. The power cord is not
suitable for replacement. If damaged, contact
SharkNinja for service.
13 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
14 Always use the appliance on a dry, level
surface.
15 Keep hands, hair, clothing, and utensils out
of container while processing to reduce the
risk of severe injury to persons or damage
to the appliance. A scraper may be used but
only when the appliance is not running.
16 Avoid contact with moving parts.
17 DO NOT attempt to sharpen blades.
18 DO NOT use the appliance if blade assembly
is bent or damaged.
19 To reduce risk of injury, never place the
blade assembly on base without pitcher
properly attached.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja NJ600WM Series and is the answer not in the manual?

Ninja NJ600WM Series Specifications

General IconGeneral
BrandNinja
ModelNJ600WM Series
CategoryBlender
LanguageEnglish

Related product manuals