PROPELLER ORIENTATION SETTING
Set propeller to vertical position. Find the distance between the blade end and the
frame with some tool (e.g. screwdriver). Then rotate the prop by 180
o
and check
whether the distance is the same on the other blade. If there is a difference, loose
firstly propeller screws on the less deflected side and than tighten both.
PROPELER MAINTENANCE
Always store the propeller in a dry place. Do not expose it to sudden temperature
changes. Store it in horizontal position. Do not expose the propeller unnecessarily
to sunshine.
Check the propeller after each flight. If it has small scratches, it is necessary to
repair them to prevent any dampness penetration. You can make Small repairs
yourself using special tools and solutions. It is necessary to balance the propeller
after every repair.
It is recommended to have the propeller generally treated and balanced after some
time.
Any unprofessional treatment of the propeller can have fatal consequences
(misbalance, high vibrations, loosing the prop in flight, frame destruction, reduction
damage,…)
REGULAR MAINTENANCE
part check replacement
radioator coolant check 10 h 100 h
exhaust cleaning 50 h -
internal filter wash 100 h 100 h
spark-plug 10 h 50 h / 1 year
engine silentblocks before each flight 100 h / 2 years
exhaust silentblocks before each flight 100 h / 2 years
reduction gear oil 10 h 100 h
In case of evident damage of any part of the paramotor it is necessary to repair or replace it
before first next flight.
To Next Page
Loading...
Need help?
General
