Note: The microSD card is sold separately.
Important: Do not remove the memory card when
an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
NOTE: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components
while changing any covers. Always store and use
the device with any covers attached.
Charge your phone
1. Insert the small end of the USB cable into
the phone.
2. Insert the larger end into the charger and
plug it into an outlet.
Your phone supports the USB-C cable. You can
also charge your phone from a computer with a
USB cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
WARNING: Only use approved chargers with your
device. Incompatible chargers or tampering with
the charger port could damage your device and
void the warranty.
Turning your phone on/off
NOTE: The first time you turn on your phone, you
will need to activate it.
See the Get started guide
included with your phone.
To switch your phone on, press and hold the
Power/Lock button.
To Next Page
Loading...
Need help?
General
