Settings
53
Call waiting > Activate — to have the network notify you of an incoming
call while you have a call in progress (network service). See “Call
waiting,” p. 21.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
Line for outgoing calls — to select the phone line 1 or 2 for making calls
if supported by your SIM card (network service).
Slide call handling — to set the phone to answer calls when you open the
phone and to end calls when you close the phone
■ Phone
Select Menu > Settings > Phone and from the following options:
Language settings — To set the display language of your phone, select
Phone language. Automatic selects the language according to the
information on the SIM card. To select the USIM card language, select
SIM language. To set a language for voice commands, select Voice
recognition language.
Security keyguard — to set the phone to ask for the security code when
you unlock the keyguard. Enter the security code, and select On.
Automatic keyguard — to lock the keypad automatically after a preset
time delay when the phone is in the standby mode and no function of
the phone has been used. Select On, and set the time.
Welcome note — to write the note that is shown when the phone is
switched on
Flight query > On — The phone asks every time when it is switched on
whether the flight profile shall be used. With flight profile all radio
connections are switched off. The flight profile should be used in areas
sensitive to radio emissions.
To Next Page
Loading...
Need help?
General
