Push to talk
72
Select a contact, a group, or Call PTT channel; and select a channel.
When you press and hold the PTT (volume up) key, the selected function
is performed.
Show my login status — to enable or disable the sending of the login
status
PTT status in startup > Yes or Ask first— to set the phone to
automatically connect to the PTT service when you switch the phone on
Push to talk when abroad — to switch the PTT service on or off when the
phone is used outside of the home network
Send my PTT address > No — to hide your PTT address from channel and
one-to-one calls
■ Configuration settings
You may receive the settings for connecting to the service from your
service provider. See “Configuration settings service,” p. 10. You can
enter the settings manually. See “Configuration,” p. 54.
To select the settings for connecting to the service, select Menu > Push
to talk > Configuration settings. Select from the following options:
Configuration — to select a service provider, Default, or Personal config.
for PTT service. Only the configurations that support the PTT service are
shown.
Account — to select a PTT service account contained in the active
configuration settings
Other parameters are PTT user name, Default nickname, PTT password,
Domain, and Server address.
■ Web
Select Menu > Push to talk > Web to access the Internet site of your PTT
provider.
To Next Page
Loading...
Need help?
General
