[ 130 ]
Synchronize from your phone
If you have saved data in the remote Internet server, you can synchronize
your phone by starting the synchronization from your phone. Once you
have customized and selected the appropriate synchronization settings,
you are ready to synchronize data. (See “Save synchronization settings”
on page 128 for more information.)
1
At the Start screen, press
Menu 13-5
(
Services > Settings
) and
press
Select
.
2
Scroll to
Active service settings
and press
Select
.
3
Select the connection settings you need for synchronization.
Note:
The synchronization settings may differ from the service
settings required for xHTML browsing. After synchronizing, change
your Active service settings back to the previous ones if you want
to use other xHTML services later.
4
Mark the data to be synchronized. See “Save settings manually” on
page 129 for more information.
5
At the Start screen, press
Menu 12-3-1
(
Connectivity >
Synchronization > Synchronize
). Synchronization begins.
Depending on the type of connection you are using to synchronize
data, connecting or initializing messages may appear.
Note:
Synchronizing for the first time or after an interrupted
synchronization may take time up to 30 minutes, if the contacts
list or calendar are full.
STOP SYNCHRONIZATION
1
To stop synchronization press
Quit
or
i
. The
Quit synchronization?
message appears.
2
Press
OK
.
HANDLING CALLS DURING SYNCHRONIZATION
During synchronization, outgoing calls are not possible. Incoming calls
can still be received, and can be handled in one of the following ways:
To Next Page
Loading...
Need help?
General
