117Copyright © 2005 Nokia. All rights
3. To set the status for the channel, select Default, Listened, or Inactive.
To reject the invitation, select View > Discard > Yes.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the service and
settings for use.
You may receive the settings for connecting to the service from your network
operator or service provider. See Configuration settings service p. 14. You can
enter the settings manually. See Configuration p. 93.
To select the settings for connecting to the service, select Menu > Push to talk >
Configuration sett. and from the following options:
Configuration — to select a service provider, Default, or Personal configuration for
PTT service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account in the active configuration settings
You can also select from the following options: Push to talk user name, Default
nickname, Push to talk password, Domain, and Server address.
To edit the PTT settings for use, select Menu > Push to talk > Push to talk settings,
and from the following options:
1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To
make but not receive one-to-one calls, select Off. The service provider may offer
some services that override these settings. To set the phone to first notify you of
incoming one-to-one calls with a ringing tone, select Notify.
To Next Page
Loading...
Need help?
General
