©2001 Nokia Corporation. All rights reserved.
Menu functions
79
Menu functions
Basic steps for accessing and using WAP services
1. Save the service settings that are needed to access the WAP service that you want to use. See
Setting up the phone for a WAP service below and Appearance settings of the WAP browser
on page 85.
2. Make a connection to the given WAP service. See Making a connection to a WAP service
on page 82.
3. Start browsing the pages of the WAP service. See Browsing the pages of a WAP service on page 83.
4. Once you are done with browsing, end the connection to the WAP service. See Ending a WAP
connection on page 85.
Setting up the phone for a WAP service
You may receive the service settings as a text message from the network operator or service provider
that offers the WAP service that you want to use. For more information, contact your network operator
or service provider, or visit Club Nokia’s Web site (www.club.nokia.com).
You can also key in the settings manually. For appropriate settings, contact your network operator or
service provider. The WAP settings may be available, for example, on the Web site of the network
operator or service provider.
Saving the service settings received as a text message
When you receive the service settings as a text message, Service settings received is displayed.
• To save and activate the received settings, press Options and select Save.
If no settings are saved in Active service settings, the settings are saved under the first free
connection set and activated.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
