Call functions
25
The video call is active when you can see two video images and
hear the sound through the loudspeaker. The call recipient may
deny the video sending, in which case you may see a still image or
a grey background graphic. You will hear the sound.
3. To end the call, press the end key.
■ Answer or reject a video call
When a video call arrives, Video Call is displayed.
1. Press the call key to answer the video call. Allow video image to be
sent to caller? is displayed.
If you select Yes, the image being captured by the camera in your
phone is shown to the caller. If you select No, or do nothing, video
sending is not activated, and you hear a sound. A graphic is
displayed on top of the video, indicating that it is not sent. You
can enable or disable video sending at any time during the video
call.
2. To end the video call, press the end key.
Even when you deny video sending during a video call, the call is still
charged as a video call. Check the pricing with your network operator
or service provider.
■ Options during a video call
Select Options during a video call for the following options: Set
contrast, Video motion, Switch to voice call, End call, Send DTMF and
Loudspeaker.
■ Video sharing
During an ongoing voice call you can share your live camera view
with the call recipient. To share a video the recipient must have a
compatible mobile device, and a SIP address in your phonebook. If the
recipient’s SIP address is missing, enter it.
Select Options > Video sharing. The phone sends an invitation and the
Sending invitation to is shown on your display. If the recipient accepts,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
