ENGLISH
Basic use
Put on the headset
To use the headset on your right ear,
attach the earloop as shown in Figure
7; to use the headset on your left ear,
attach the earloop from the other
side. Slide the earloop over your ear
(9), and gently push the earpiece into
your ear. Point the headset towards
your mouth (10).
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
To redial the number you last called (if
your phone supports this feature with
the headset), when no call is in
progress, press the multifunction key
twice.
To activate voice dialling (if your
phone supports this feature with the
headset), when no call is in progress,
press and hold the multifunction key
for about 2 to 4 seconds. Proceed as
described in the phone user guide.
To answer or end a call, press the
multifunction key. To reject a call,
press this key twice.
To adjust the volume during a call, use
the phone volume keys.
To switch a call between the headset
and a compatible phone, press and
hold the multifunction key for about 2
to 4 seconds.
Clear settings or reset
To delete the pairings from the
headset, switch off the headset, and
press and hold the multifunction key
for over 8 seconds until the headset
beeps twice and the indicator light
flashes quickly.
To Next Page
Loading...
Need help?
General
