ENGLISH
Get started
The headset contains the following
parts shown on the title page:
earpiece (1), indicator light (2),
multifunction key (3), earloop (4),
charger connector (5), and
microphone (6).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them
may be erased.
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
Warning: Use only chargers
approved by Nokia for use
with this particular model. The use of any
other types may invalidate any approval
or warranty, and may be dangerous.
Use of unapproved chargers may present
a risk of fire, explosion, or other hazard.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to
awalloutlet.
2. Connect the charger cable to
the charger connector. The red
indicator light is displayed during
charging. Charging the battery
fully may take up to 2 hours.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
