6
6 © 2010 Nokia. All rights reserved.
Get started
The headset contains the
following parts shown on the title
page: multifunction key (1), Near
Field Communication (NFC) area
(2), charger connector (3),
microphone (4), earloop (5),
earpiece (6), and indicator light
(7).
Before using the headset, you
must charge the battery and pair
the headset with a compatible
device.
Parts of the device are magnetic.
Metallic materials may be attracted
to the device. Do not place credit
cards or other magnetic storage
media near the device, because
information stored on them may be
erased.
Charge the battery
Before charging the battery,
carefully read “Battery and
charger information”.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector (8). The
red indicator light is displayed
during charging.
Charging the battery fully may
take up to 2 hours.
3. When the battery is fully
charged, the green indicator
light is displayed. Disconnect
the charger from the headset,
then from the wall outlet.
When you unplug a charger,
hold and pull the plug, not the
cord.
To Next Page
Loading...
Need help?
General
