Nokia FNE32GV210 User Manual

19
In order to congure other settings of the satellite and to enable scan this option should be set as On rst. Press
Back button and select the next satellite you want to set. After you completed the conguration changes, press
the Right directional button to proceed.
If Load Preset List option is selected in the previous step next steps will be skipped and the preset channel list
installation will start. If the correct satellite has not been selected for SatcoDX installation, a warning dialogue will
be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close the dialogue and
then set the satellite accordingly.
Channel Scan screen will be displayed next. Select Scan and press OK or the Right directional button to proceed
with the scanning congurations. Select Skip Scan to proceed without performing a scan and complete the initial
setup.
DVBS Scan Congure screen will be displayed next if Scan option is selected. Following options will be available:
Scan Mode and Channels. You can choose to perform a full scan or a network scan. Set the Scan Mode accordingly.
If you are going to perform a network scan, make sure that you have adjusted the Frequency, Symbol Rate
(kSym/s) and Polarisation parameters under the Transponder option accurately on the Satellite Setup screen. You
may not be able to change the Scan mode setting depending on the previous selections. If the Channels option
is set as Free encrypted channels will not be installed. Additional options may also be available depending on the
selected operator, congure these settings according to your preferences. Once you are done with setting the
available options, press the Right directional button to start scan while Scan Mode or Channels is highlighted.
While the search continues you can press the Back button to cancel the search. The channels that have already
been found will be stored in the channel list.
When the initial setup is completed, results will be displayed. Press OK to nish the setup.
Home Screen will be displayed. You can highlight Live TV app and press OK to switch to Live TV mode and watch
TV channels.
8. Home Screen
To enjoy the benets of your Android TV, your TV must be connected to the Internet. Connect the TV to a home
network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your modem/
router. Refer to the Network & Internet and Connecting to the Internet sections for further information on how
to connect your TV to the internet.
The Home menu is the centre of your TV. Press the Home button to display the Home Screen. From the Home
menu you can start any application, switch to a TV channel, watch a movie or switch to a connected device.
Depending on your TV setup and your country selection in the initial setup the Home menu may contain dierent
items.
The available options of the Home Screen are positioned in rows. To navigate through the Home Screen options,
use the directional buttons on the remote. Apps, YouTube, Google Play Movies & TV, Google Play Music and
Google Play related rows and rows of the applications you have installed might be available. Select a row then
move the focus to the desired item in the row. Press OK button to make a selection or to enter a sub-menu.
On the upper left of the screen, search tools will be located. You can choose either to type a word to start a
search via the virtual keyboard or try voice search option if your remote has a built-in microphone. Move the
focus to the desired option and press OK to proceed.
On the upper right of the screen, Notications, Inputs, Network & Internet (will be named as Connected or Not
Connected according to the current connection status), Settings and the current time will be displayed. You
can congure your date and time preferences using the Date & time menu options from the Settings>Device
Preferences menu.
First row will be the Apps row. Live TV and Multimedia Player apps will be available alongside with other apps.
Highlight Live TV and press OK to switch to Live TV mode. If the source was previously set to an option other than
TV, press the Source button and select the TV to watch live TV channels.
Highlight Multimedia-Player and press OK to browse the connected USB devices or media servers and play/
display the installed media content on the TV. The audio les can be played through the speakers of the TV or
through the speaker systems connected to the TV. You can congure your sound output preference from the
Speakers option in the “Settings > Device Preferences > Sound” Menu.

Nokia FNE32GV210 Specifications

General

Brand	Nokia
Model	FNE32GV210
Category	TV
Language	English