22
available options.
• Set TimeShift: Tag the selected USB storage device or a partition on it for time shift recording.
• Set PVR: Tag the selected USB storage device or a partition on it for PVR.
• Format: Format the selected USB storage device. Refer to USB Recording section for more information
• Speed Test: Start a speed test for the selected USB storage device. The test result will be displayed when
completed.
• Schedule List: Add reminders or record timers using the Schedule List menu.
• Time Shift Mode: Enable or disable timeshift recording feature. Refer to USB Recording section for more
information.
10. Settings
You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
10.1. Network & internet
You can congure your TV’s network settings using the options of this menu. You can also highlight the
Connected/Not Connected icon on the Home screen and press OK to access this menu.
• Wi-Fi: Turn the wireless LAN (WLAN) function on and o.
When the WLAN function is turned on, available wireless networks will be listed. Highlight See all and press OK
to see all networks. Select one and press OK to connect. You may be asked to enter a password to connect to
the selected network, in case the network is password protected.
• Add new network: Add networks with hidden SSID’s.
• Scanning always available: You can let the location service and other apps scan for networks, even when
WLAN function is turned o. Press OK to turn it on and o.
10.1.1. WoW
Turn the Wake on WLAN function on and o. This function allows you to turn on or awaken your TV via wireless
network.
10.1.2. WoL
Turn the Wake on LAN function on and o. This function allows you to turn on or awaken your TV via network.
10.1.3. Ethernet
Connected/Not connected: Displays the status of the internet connection via Ethernet, IP and MAC addresses.
10.1.4. Proxy settings
Set a HTTP proxy for browser manually. This proxy may not be used by other apps.
10.1.5. IP settings
Congure your TV’s IP settings.
10.2. Channels
Options of this menu may change or become inactive depending on the Channel Installation Mode selection.
10.2.1. Channel installation mode – Antenna
• Automatic Channel Search: Start a scan for analogue and digital channels. You can press the Back button to
cancel the scan. The channels that have already been found will be stored in the channel list.
• Update Scan: Search for updates. Previously added channels will not be deleted, but any newly found
channels will be stored in the channel list.
To Next Page
Loading...
Need help?
General
