To Next Page

To Previous Page

then OK. Teletext will close and the recording will start.

Recording of radio programs is supported.

15.1. Instant recording

Press the REC button to start recording an event instantly while watching a programme.

Press and hold REC button for 3 seconds to stop and save the instant recording.

You can not switch broadcasts during the recording mode.

15.2. Watching recorded programmes

Select Record List from the Record menu in Live TV mode and press OK. Select a recorded item from the list (if

previously recorded). Press the OK button to watch.

Press and hold REC button for 3 seconds or press Back/Return button to stop a playback.

The recordings will be named in the following format: Channel Name_Date(Year/Month/Day)_ Duration(Hour/

Minute/Second) _Programme Name.

15.3. Time Shift recording

In Time Shift recording mode, the program is paused and simultaneously recorded to the connected USB storage

device. The Time Shift recording function must rst be activated in the menu “Record > Time Shift Mode > OK”.

To activate time-shift recording while watching a programme in Live TV mode, press the Play/Pause button on

your remote control.

Note: When using the Time Shift function for the rst time, a Disk Setup conguration dialog will be displayed

on the TV screen. Select the oered conguration options and follow the steps in the Time Shift conguration

menu. You can either choose Auto or Manual setup mode. In Manual mode, if you prefer, you can format your

USB storage device and specify the storage space that will be used for Time Shift recording.

Press Pause/Play button again to resume the paused program from where you stopped. Press and hold REC

button for 3 seconds to stop Time Shift recording and return to the Live TV broadcast.

When this feature is used for the rst time, the Disk Setup wizard will be displayed when the Pause/Play button

is pressed. When the setup is complete, the Disk Setup Result will be displayed. Press Exit button.

Time Shift recording function will not be available for radio broadcasts.

15.4. Disk format

When using a new USB storage device, it is recommended that you rst format it by using the Format option

in the menu “Record > Device” Info menu in Live TV mode. Highlight the connected device on the Device Info

screen and press OK or Right directional button to see the list of available options. Then highlight Format and

press OK to proceed. A conrmation dialogue will be displayed. Highlight Yes and press OK to start formatting.

IMPORTANT: Formatting your USB storage device will erase ALL the data on it and its le system will be converted

to FAT32. In most cases operation errors will be xed after a format but you will lose ALL your data.

15.5. Schedule list

You can add Reminders or Record Timers using the Schedule List menu. You can access the Schedule List from

the Record menu in Live TV mode. Highlight Schedule List and press OK. Previously set Timers will be listed if

any available.

Press Record button to add a timer while the Schedule List menu is displayed on the screen. You can dene the

type of the timer by setting the Schedule Type option as Reminder or Record. When other parameters are set

highlight Add and press OK. The timer will be added to the list.

Nokia QNR50GV215ISW User Manual

Questions and Answers: