Copyright © 2006 Nokia. All rights reserved.
Tools
90
Date and time
See “Clock settings”, p. 3.
See also the language settings in “General”, p. 85.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See “Glossary of PIN
and lock codes”, p. 91.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See “Glossary of PIN and
lock codes”, p. 91.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks and
can be used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select None to turn
off the autolock period.
To unlock the device, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A
list of commands opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognised as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
To Next Page
Loading...
Need help?
General
