NORDIC HOT TUBS | OWNER’S MANUAL |
7
POWER INSTALLATION INSTRUCTIONS
WIRING LOCATIONS
Some installations work best to drill a hole in the side panels and others require the wiring to come up from the bottom.
We’ve included line drawings with approximate “safe” locations for the wiring to be plumbed in from the bottom. Please
reference the following drawings.
3-4"
8-10"
A good location for
the wire to enter
through the bottom
is 3" to 4"left and 8"
to 10" back from
the left corner of
the access door
Access Panel
78.5" Diameter
6"
12"
A good location for
the wire to enter
through the bottom is
12" from the center of
the access panel and
6" from the edge of
the cabinet
Access Panel
84" Diameter
IMPULSE, SPORT, CROWN II & IMPULSE DP
CROWN, WARRIOR XL & CROWN XL
To Next Page
Loading...
Need help?
General
