15
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter. If
you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the
receptacle on the
frame of the ellipti-
cal. Then, plug
the power adapter
into an appropriate
outlet that is properly
installed in accor-
dance with all local codes and ordinances.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, mov-
ing it requires two persons. Have a second person
place one foot against one of the wheels. Grip the
handle and lift the frame until the elliptical will roll on
the wheels. Carefully move the elliptical to the desired
location, and then lower it to the floor.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks
slightly on your
floor during use,
turn one or both
of the leveling feet
beneath the front of
the frame until the
rocking motion is
eliminated.
HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL
To a d just the stri de o f th e ell ipti c al, turn the adju stme n t
knobs clockwise or counterclockwise. Make sure that
both adjustment knobs are at the same setting.
Place your
foot here
Lift
here
Leveling
Foot
Adjustment
Knobs
HOW TO USE THE ELLIPTICAL
To Next Page
Loading...
Need help?
General
