13
Method of positioning the water heater on a wall
• Drill in the supplied anchor screws after considering where the vent termination will be located.
• After four anchor screws are inserted in the holes, mount the wall bracket.
• Afx the wall bracket securely to the wall.
• Make sure that it is leveled, and it can support the weight of the water heater.
• Lift up the water heater, rest the unit on the hooks provided on the wall bracket on the wall.
Securing to the wall
Chapter4.–Installation
4-1. Securing to the wall
WARNING
CLEARANCESFORSERVICEACCESS
The water heater must be installed on a wall that can bear its weight.
If you try to install the heater on a wall which cannot support its weight, please reconsider.
The Water heater can be installed on any suitable internal wall (suitable sound proong may be required
when installing onto a stud partition wall).
To Next Page
Loading...
Need help?
General
