Page 10 of 10 — DN-5262 • 10/31/05
NBG-12LX: Addressable pull station, visible LED.
See
DN-6726.
B224RB: Low-profile relay base.
B224BI: Isolator base for low-profile detectors.
B710LP: Low-profile base. Standard U.S. style.
B501: European-style, 4" (10.16 cm) base.
B501BH: Sounder base, includes B501 base above.
FMM-1: Monitor module.
See DN-6720.
FMM-101: Monitor module, miniature.
See DN-6720.
FDM-1: Monitor module, dual, two independent Class B cir-
cuits.
See DN-6720.
FZM-1: Monitor module, two-wire smoke detectors.
See
DN-6720.
FCM-1: Control module.
See DN-6724.
FRM-1: Relay module.
See DN-6724.
ISO-X: Isolator module.
See DN-2243.
XP Series: Transponder.
See DN-0759.
XP5-M: Transponder, five monitor points.
See DN-6625.
XP5-C: Transponder, five control points or Form-C relays.
See DN-6625.
XP6-C: Six-circuit supervised control module.
See
DN-6924.
XP6-MA: Six-zone interface module; connects intelligent
alarm system to two-wire conventional detection zone.
See
DN-6925.
XP6-R: Six-relay (Form-C) control module.
See DN-6926.
XP10-M: Ten-input monitor module.
See DN-6923.
XPIQ: Intelligent quad transponder.
See DN-6823.
OTHER ACCESSORIES
4XTM: Plug-in Transmitter Module. Provides municipal box
and remote station connection.
BAT Series: Batteries; the AFP-300/400 battery range is
12 AH to 60 AH.
See DN-6933.
ROM-AFP400: Panel software upgrade kit. Includes latest
factory software
(consult factory)
.
BB-55(F): Battery Box
(required for 55/60 AH)
. Order "F"
suffix for red cabinet.
VeriFire-CD: Programming kit for PC. Includes CD, cable,
and instructions.
VeriFire-CDUG: Same as VeriFire-CD above except it does
not include the cable.
Other options as listed in previous sections.
To Previous Page
Loading...
Need help?
General
