EasyManuals Logo

Nova 5000 Series User Manual

Nova 5000 Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background image
4 of 8
SAFETY INSPECTION - MAINTENANCE
Your product is a precision product - proper care will ensure proper function. Regular
cleaning will reveal loose or worn parts. DO NOT over tighten parts or hardware,
as doing so can damage the frame. DO NOT operate the product if there are any
missing parts or hardware. You should have a dealer or qualified professional perform
maintenance on your product at least once every six months, or immediately if you
notice any item needing service. Frequent use likely means that your product will
require more maintenance than we suggest. In anticipation of and after any excessive
use, we recommend that you perform a complete safety inspection including all items.
ITEM
INSPECT ITEM INITIAL WEEKLY MONTHLY 6 MONTHS
GENERAL
Wheelchair should roll straight, doesn't feel "tight"
or pull to one side
X X
Inspect for loose, missing, or broken hardware in
all locations
X X
Inspect cane hand grips for wear, looseness, or
deterioration
X X
FRAME
Inspect for bent frame X X
Inspect weld points for cracks, chips, or loose
material
X X
CROSS-BRACES
Inspect for bent cross-braces X X
Inspect weld points for cracks, chips, or loose
material
X X
BRAKES
Ensure brakes do not interfere with wheels when
rolling
X X
Pivot points free of wear and looseness X X
Brakes are easy to engage, and engage fully X X
Brakes prevent wheelchair from moving when
engaged.
X X
SEAT AND BACK
Inspect upholstery for rips or sagging X X
Inspect for loose or broken hardware X X
WHEELS
Lift, spin, and check for side movement, rubbing,
or binding
X X
Inspect for correct and equal pressure X
Inspect for cracks and wear (hubs and rims) X X
Inspect for cracked or broken spokes X X
HAND RIMS
Inspect for signs of rough edges or peeling X X
FRONT FORKS
Inspect wheel/fork assembly for proper tension by
spinning caster. Caster should come to a gradual
stop, and not bind or grind
X X
Adjust bearing system if wheel wobbles noticeably
or binds to a stop
X X
Ensure wheel bearings are clean and free of debris X X
Check swivel fork locknuts for tightness X X
CLEANING
Clean upholstery and arm rests X X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nova 5000 Series and is the answer not in the manual?

Nova 5000 Series Specifications

General IconGeneral
BrandNova
Model5000 Series
CategoryWheelchair
LanguageEnglish

Related product manuals