Numark MIXDECK EXPRESS User Manual

2
BOX CONTENTS
 MIXDECK EXPRESS
 Power cable
 USB cable
 Software CD
 Quickstart Guide
 Safety & Warranty Information Booklet
SETUP
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
• Amplifiers
• Mixer
• Last, any input devices
CONNECTION DIAGRAM
MICROPHONE
HOUSE AMP TURNTABLE
POWER
HEADPHONES
COMPUTER

Numark MIXDECK EXPRESS Specifications

General

Channels quantity	3 channels
Digital sound processing	- bit
XLR out	1
Microphone in	Yes
USB 2.0 ports quantity	2
Cables included	USB
Bundled software	Serato DJ Intro
Quick start guide	-
USB powered	No
Product color	Black, Silver