6
35. Loop On/Off: Press this button to activate auto loop on/off. Hold Shift and press this button to
trigger a reloop.
36. Loop 1/2: Press this button when a loop is active to decrease the loop size by half. Hold Shift
and press this button to set the Loop In point.
37. Loop x2: Press this button when a loop is active to double the loop size. Hold Shift and press
this button to set the Loop Out point.
38. Mic 1/Line Switch: Flip this switch to the appropriate position, depending on the device
connected to the Mic 1 Input. If you are using a microphone connected to the Mic 1 Input, set
the switch to Mic 1. If you are using a device such as a CD player or sampler connected to the
Aux Input, set the switch to Line.
39. Mic 1/Line Level: Turn this knob to adjust the level for the Mic 1 Input or Aux Input.
40. Mic 1/Line Tone: Turn this knob to adjust the tone of the Mic 1 Input or Aux Input. Turn left to
increase the Low frequency tone, or turn right to increase the High frequency tone.
41. Booth Volume: Turn this knob to adjust the output volume of the Booth Output mix.
42. Main Volume: Turn this knob to adjust the output volume of the Main Output mix.
Display
1. Active Deck: Indicates the currently active deck.
2. Platter Position: Displays the current track position.
3. BPM: Displays the current BPM for the selected
track.
4. Keylock: This icon illuminates when Keylock is active
for the current deck.
5. Pitch Range: Shows the current pitch range.
6. Pitch: Shows current pitch of the track.
7. Pitch Adjust: Indicates the direction to move the
Pitch Fader to match the current track’s BPM with
the track on the opposite deck.
8. Time Remaining: Displays the time elapsed or time
remaining for the current track.
9. Time Bars: Provides visual reference to time
remaining on the selected song. When the song is
almost over these segments will flash to give a
warning.
To Next Page
Loading...
Need help?
General
