4
FRONT PANEL FEATURES
1
6
7
7
7
8
9
10
11
12
13
21
14
22
23
15
16
17
18
19
20
11
10
9
8
6
7
7
7
2
3
4
5
MICROPHONE / AUXILIARY INPUT CONTROLS
1. MIC / AUX GAIN (Microphone / Auxiliary Gain): This knob adjusts the volume of both the main
microphone and auxiliary inputs. The gain should be turned completely to MIN when connecting and
disconnecting equipment. If both inputs are used simultaneously the inputs will be mixed together.
(Note: This signal will not be heard in the Cue channel.)
2. TREBLE (Microphone / Auxiliary High EQ): Adjusts the high (treble) frequencies of the microphone /
auxiliary channel.
3. BASS (Microphone / Auxiliary Low EQ): Adjusts the low (bass) frequencies of the microphone /
auxiliary channel.
4. MIC / AUX ON / OFF: Mutes and unmutes the microphone / auxiliary channel.
5. MICROPHONE: Connect a 1/4" microphone to this input. Microphone controls are located on the top
panel.
PRIMARY MIXING CHANNEL CONTROLS
6. GAIN KNOB (Input Level Trim): This rotary control adjusts the pre-fader input signal levels of the
inputs. This level adjustment should be used with the pre-fader meter to match levels of both input
channels.
To Next Page
Loading...
Need help?
General
