HARDWARE INSTALLATION
HARDWARE INSTALLATION
Installing the NVIDIA Tesla K20 Active
Accelerator graphics card hardware involves
opening up your computer. Follow all of the
safety instructions provided here to ensure that
there is no damage to you, your computer, or the
graphics board.
Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic
safety precautions.
Note: All hardware must be installed prior to installation of
the drivers.
> Remove power from your computer by disconnecting the AC main
source before installation.
> Do not operate this product near water or when your hands or
body are wet.
> Do not place this product on soft surfaces that could block the
ventilation slots and cause overheating.
> Do not place this product near a heating register or radiator.
> Place this product securely on a stable surface. Serious damage
to this product may result if it falls.
> Do not allow anything to rest on the power cord. Do not place
this product where a person can step or trip on the power cord.
To Next Page
Loading...
Need help?
General
