27
10. SPECIFICATIONS AND DIMENSIONS
Power Amplifier.
Configuration: push pull pentode circuit, class A/B; negative grid voltage adjustable separate for
each power tube through ten turn precision regulators. Special wideband output transformers using
high efficient PMZ core.
Output Power into 4 ohms: Power Selector High: 2 x 100 W RMS
Power Selector Low: 2 x 70 W RMS
Peak Power into 4 ohms: Power Selector High: 2 x 130 W Peak
Power Selector Low: 2 x 90 W Peak
Into 8-Ohms Load the Output Power is reduced by 20 %
Power Bandwidth: 25 Hz – 70 KHz / - 3dB at Full Power
5 Hz – 80 KHz / -3dB at 5 W
Noise: < 100 µV 150 Hz – 15KHz, > -110dB
Input Sensitivity: 0,8V RCA; 1.6 V XLR
Input Resistance: 220 k RCA; 10 k each Phase XLR
CMRR of the XLR-Input: > 85dB / 1 kHz
Minimal Load Impedance: 2
Gain: +28dB - RCA
Eco Mode Trigger Level: 0.5mV
In- and Outputs:
Inputs: 1 x RCA, 1 x XLR
Outputs: 1 x speaker terminal suitable for 4 mm Banana
connectors and spades
Construction
- double sided PCBs with plated-through holes using 130µm copper
- ceramic tube bases with silver contacts
- specially selected and burned-in long-life tubes
- professional, low inductance storage electrolytics, LH grade 105° C
- available in black or silver design
General
Power consumption: < 20 W in Ecomode, 180 W idle, 450 W at full power
Weight: 25.2 kg
Mains: 100 V / 120 / 240 VAC available
Dimensions: 488 x 186 x 410 mm (W x H x D)
Optional Black Box:
Dimensions: 170 x 97 x 257mm (W x H x D)
Weight: 3.1 kg
Connecting Cable: 70 cm (other lengths on request )
Optional Super Black Box:
Dimensions: 203 x 159 x 320mm (W x H x D)
Weight: 7.5 kg
Connecting Cable: 80 cm (other lengths on request )
To Next Page
Loading...
Need help?
General
